Textile Sling types
Roundslings
- Lifts smooth objects without any damage
- Ideal for choke lifting cylindrical objects
- Lifts polished or greasy objects
- Wears evenly along its length for greater working life
- High strength to weight ratio
- Anti-cut and anti-abration protection available
- Available from 1 tonne to 100 tone lifting capacity
- Available in a choice of outer sleeving for different applications
- Conforms to BS EN 1492-2
- Standard safety factor of 7:1
| OUTLINE TECHNICAL SPECIFICATION | |
| Materials | 100% Polyester |
| Temp. Range | -40°c to + 180°c |
| Min. Break Strength | 7x indicated WLL |
| Max. Elongation | 3% at WLL 10-13% at MBS |
| Chemical Resistance | Refer to Technical Bulletin |
Description
SpanSet roundslings are manufactured from 100% polyester yarn hank, wound continuously together in the form of an endless sling. The hank is protected by a 100% polyester tubular sleeve. SpanSet roundslings are manufactured strictly in accordance with BSEN 1492-2.
The outersleeving is entirely non-loadbearing and serves both to protect and consolidate the polyester core. The roundslings flattens in use to provide a secure grip on the load. The unique SupraPlus monofilament weft gives a longer service life due to greater resistance to wear and damage.
Flat Webslings
- Lifts smooth objects without risk damage
- Light and flexible for good access in awkward locations
- Wide flat loadbearing surface
- Two basic types:Simplex and Duplex
- Anti-cut and anti-abration protection available
- High strength to weight ratio
- Wide choice of lifting modes
- Available from 1 tonne to 30 tonne lifting capacity
- Available in various finnishes to suit application
- Conforms to BS EN 1492-1
- Standard safety factor of 7:1
| OUTLINE TECHNICAL SPECIFICATION | |
| Materials | 100% Polyester |
| Temp. Range | -40°c to + 180°c |
| Min. Break Strength | 7x indicated WLL |
| Max. Elongation | 3% at WLL 10-13% at MBS |
| Chemical Resistance | Refer to Technical Bulletin |
Description
SpanSet Flat Webslings are manufactured from a single length of 100% polyester webbing. Simplex slings consists of a single layer of webbing wheras Duplex are effectively stitched through two thicknesses throughout most of their length.
Sling ends are terminated in either a reinforced becket eye or any combination of metal end fittings to suit special applications.
The unique PowerStar webbing construction gives longer service life due to greater resistance to wear and damage.
The SpanSet Webslings are manufactured strictly in accordance with BSEN 1492-1.
