Horizontal Safety Line
The SpanSet Horizontal Safety Line is a temporary anchorage line, designed for use in conjunction with compatible fall arrest and work restraint equipment. It provides a lightweight and easily installed solution for a wide variety of situations.
The line is installed by attaching it between two anchorages that are rated to a minimum of 15kN. The anchorages can be structural elements, tested installations or certified components. It is then tensioned using the ratchet, which is locked off once complete. The maximum length available is 20 metres, although the line can be set at any length up to that. Once finished with the line is easily removed and can be re used many times, provided that it is suitably inspected and maintained.
Fall arrest use
The HSL is tested for single person use with a fall arrest lanyard (EN355). The location of the line in relation to the user and the length of lanyard selected will vary the safe working height. SpanSet can assist with this assessment.
Work restraint use
When used as part of a work restraint system the horizontal line is suitable for multiple users. They can attach to it using restraint or fall arrest lanyards which can be fixed length or adjustable providing that they adequately restrain the user from approaching the hazard. They may also attach using adjustable restraint systems such as the SpanSet standard safety line (SSL-A). This will enable the user to cover a larger working area as long as the SSL-A is adjusted correctly.
The Horizontal Safety Line is available with swivel hooks or plain loops at each end. The loop version needs EN362 karabiners connectors for attachment.
The system is supplied in an integral bag with shoulder strap for ease of carrying. The bag also helps to store excess webbing when not in use.
For inspection purposes there is a black line woven into the webbing selvedge.
When this becomes visible the horizontal safety line must be withdrawn from service.
Available in lengths up to 20 metres.
CE approved using the procedure described in EN795.
Horizontal safety line patent no. GB 2 269 623 B
Order Code: HSL-HH
Order Code: HSL-LL
APPLIES TO
1PL HARNESS
Order Code:1PL
A lightweight full body harness.
Stainless steel fittings.
One fall arrest link at rear.
Adjustable at leg loops, shoulders and chest.
CE approved to EN361
2-POINT HARNESS
Order Code:2P
A light weight simple to use full body harness
Stainless steel fittings.
Fall arrest links at front and rear.
Fitted with clear usage instructions.
CE approved to EN361
ATTACHMENT SLINGS
Continuous polyester sling in protective tubular sleeve.
Ordering details:
ATSL - 0.5 EWL 500 mm long.
ATSL - 1.0 EWL 1 mtr long.
ATSL - 1.5 EWL 2 mtr long.
ATSL - 2.0 EWL 2 mtr long.
Special lengths available - contact Spanset for details.
CE Approved to EN 566 and EN 795:class B
T-PAK LANYARD KK
Order Code:TP107
Two Steel Screwgate Karibiners.
Fully Shock Absorbed Pack.
1.75 metres in length
CE approved to EN 355
