|
DURATION
1/2
a day or 3 hours, but only carried out in conjunction with module
1.
RATIO
OF TRAINERS TO TRAINEES
Normally
10: 1
REGISTRATION
AND PRE-COURSE INSTRUCTIONS
- All
delegates to be registered on the course registration form
- All
delegates to be advised of the following
·
Fire procedure
·
Toilets and welfare
This
Module is designed as an enhancement of module 1 and is only carried
out when delegates have successfully completed that module.
INTRODUCTION
The
course is designed to provide;
- A
practical enhancement to module 1 to allow delegates the opportunity
to apply the knowledge to typical locations.
- The
applications will ideally be tailored to those typically
encountered by the delegates in their work situation, but to ensure
a good depth of knowledge they will also include common applications.
COURSE
SYLLABUS
Theory
There
are no theory elements to those covered in module 1.
COURSE
SYLLABUS
Practical
In
addition to the practical elements af module 1 the following topics
will be covered and where appropriate additional topics specific
to the client will also be covered. If any of the following elements
are not required by the client then delegates will be given a knowledge
of them, but will not individually be required to practice them.
The
topics are;
-
Correct fitting and adjustment of fall arrest harnessses
by all delegates.
- Ladder
ascent and descent using inertia blocks.
|
 |
- Ladder
ascent and descent using in-situ permanent systems.
- Ladder
ascent and descent using temporary systems.
- The
use of fall arrest lanyards.
- The
use horizontal safety lines.
- The
use of horizontal trans-fastener type systems.
COURSE
SUMMARY
- In
addition to the test carried out in module 1 all delegates will
be monitored by the trainer throughout the practical sessions.
Any concerns will be addressed by delegate and trainer on a continual
basis.
- Summarise
the topics covered during the course.
- Issue
course feedback forms.
- Thank
the delegates for attending.
EQUIPMENT
REQUIRED
- Fall
arrest manuals.
- White
boards and markers.
Samples of -
· Fall arrest harnesses and lanyards
· Work positioning harnesses and attachments
· Damaged and deployed equipment
· Rescue kits
- 2
Point fall arrest harness
- Inertia
block
- Rail
lock travellers
- Slip
lock travellers
- Altochute
- Fall
arrest lanyards
- Horizontal
safety line
- Latchway
trans-fasteners
FEEDBACK
TO CLIENT AFTER COURSE
- Certificate
for all delegates, valid for three years
- Photo
ID card for all delegates, valid for three years
RECORDS
TO BE MAINTAINED BY SPANSET
- Course
registration sheet
- Copy
photo for duplicate issue
- Course
feedback forms where completed
|
