Gotcha Rescue Range
Work at height can be a hazardous activity. It is essential therefore that we address all the hazards present and reduce the associated risks wherever possible.
Correct selection of equipment and training are an essential part of this process. However whilst some hazards are easy to identify, other less obvious hazards can have equally devastating effects.
Gotcha Rescue Kit
The Gotcha Rescue Kit is original kit in the Spanset Gotcha range, designed for tradesmen who work at height.
The Gotcha rescue kit is a unique solution to a problem faced by all workers at height who use PPE for protection against falls.
The kit will work effectively with conscious or unconscious casualties, the rescuer can carry out the rescue from a point of safety, the rescue can be carried out by a single person, no cutting is required and you can raise or lower the casualty in a controlled manner to the nearest point of safety.
- Suitable for Rescue from – Fall Arrest Lanyards and Fall Arrest Blocks
- This is a no-cut kit – The casualty is raised to release their original attachment
- Rescue direction – You can raise or lower the casualty with this kit
- Pre-assembled – No assembly is required by the user
- Remote attachment – The casualty can be attached from a point of safety
- Single person use - The Gotcha is for raising or lowering a single person
- Maximum Working Length – The Gotcha kit is available in four lengths. The following is a guide to assist when selecting a Gotcha kit.
- Colour coding - The kit is colour coded for simplicity
Independently tested to EN: 1496.
Click here for more on the Gotcha Rescue Kit > > >
The Gotcha rescue range also includes evacuation devices or rescue devices that can be used for evacuation.
These include :
- Gotcha Shark Rescue Kit
- Gotcha Shark TC Rescue Kit
- Gotcha CRD Rescue Kit
- Gotcha Evacuation Kit
- Gotcha Pole Top Rescue Kit
- Gotcha FR Rescue Kit
Once again, these should be assessed against the application and the ability of the user.