http://www.spanset.co.uk/calendar/events/ en-us Copyright 2004-2010 Refresh Web Development LLC http://www.HeliosCalendar.com http://www.spanset.co.uk/calendar/events/index.php?com=rss Upcoming Event Information From The Spanset UK Training Events http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10136 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10136 Mon, 06 Sep 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10137 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10137 Thu, 09 Sep 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10138 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10138 Mon, 13 Sep 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10139 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10139 Thu, 16 Sep 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10140 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10140 Mon, 20 Sep 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10141 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10141 Thu, 23 Sep 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10142 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10142 Mon, 27 Sep 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10143 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10143 Thu, 30 Sep 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10144 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10144 Mon, 04 Oct 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10145 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10145 Thu, 07 Oct 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10146 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10146 Mon, 11 Oct 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10147 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10147 Thu, 14 Oct 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10148 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10148 Mon, 18 Oct 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10149 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10149 Thu, 21 Oct 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10150 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10150 Mon, 25 Oct 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10151 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10151 Thu, 28 Oct 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10152 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10152 Mon, 01 Nov 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10153 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10153 Thu, 04 Nov 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10154 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10154 Mon, 08 Nov 2010 http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10155 DURATION1 1/2 HoursRATIO OF TRAINERS TO TRAINEES1 Trainer to 10 TraineesPRE-COURSE INSTRUCTIONS AND ENTRY REQUIREMENTS- No Previous Experience RequiredFor practical training only:- All delegates must be able to certify that they are physically fit and have no medicalconditions that might prevent them working at height.- SpanSet reserves the right to exclude unsuitable delegates from training courses.- Delegates must be 18 years or overOVERVIEWThis is a stand alone course designed for employees who wish to access vehicles /structures using the Vehicle Mounted Work Restraint System.- The course will allow delegates to carry out pre-use checks and use the harness andsystem safely.During training delegates will be expected to carry out activities at height. This willprovide an insight into the delegates’ ability to operate in such conditions. This is onlyan indication of their capability, as it is not possible to recreate exact workingenvironments.- The actual height and exposure will be set out on the certification, but this is onlyto show what was included in the training. The height shown on the certification isnot intended to limit the height at which the delegate can operate.- Further details of the training facilities, first aid provision, insurance, etc areavailable upon written request.COURSE SYLLABUSTheory- The trainees will be able to understand the legislationsurrounding work at height and how it relates to thesystem.- Understand the category of work – “Work Restraint” –and the potential loads that this system may apply toanchorages.- Understand the details behind the equipment standardsto ensure usage within the intended purpose- Understand how to safely access and attach to theFall Prevention system and work without risk of falling.- The trainees will be able to ensure that all the equipmentrequired and installed is in suitable condition for use.This will include an understanding of pre-use inspection,interim inspection and thorough examination.Practical- Pre use check of the belt (harness) and system- Fitting and adjustment of the work restraint system- Safe access onto the vehicle / structure- Attachment to the system- Safe movement while on the vehicle / structureASSESSMENT METHODSDetails of written assessmentsAll candidates will carry out a multiple-choice test coveringthe key points of the course. If a candidate gets a totalscore of less than 80% then the trainer will explore thecandidates’ knowledge of the topic. Where the candidatehas a good understanding of the topic the result may beamended.Details of other assessment methodsDuring the course the candidates will be continuallyverbally assessed by the trainer using working examplesand scenarios to determine the delegates understanding ofa specific topic.In addition to the test carried out all delegates will bemonitored by the trainer throughout the practical sessions.Any concerns will be addressed by delegate and trainer ona continual basis.EQUIPMENT COVERED DURING TRAINING- Work restraint system mounted on vehicle- Harness/Belt, Lanyard.FEEDBACK TO CLIENT AFTER COURSE- Photo ID card for all delegates, valid for three years.- Certificate for all delegates, valid for three years.RECORDS TO BE MAINTAINED BY SPANSET- Course registration sheet, including results of theassessment.- Digital photo for duplicate issue of ID cards.- Course feedback forms where completed.Full details available on this PDF - clck here. http://www.spanset.co.uk/calendar/events/index.php?com=detail&eID=10155 Thu, 11 Nov 2010